회사 세부 사항

  • Hebei Jiebin Wire Mesh Products Co.,Ltd.

  •  [Hebei,China]
  • 회사유형:제조사
  • 주요 시장: 세계적인
  • 수출업자:81% - 90%
  • 인증서 표시:ISO9001, CE
메세지 바구니 (0)

Hebei Jiebin Wire Mesh Products Co.,Ltd.

홈페이지> 블로그> Hot dip galvanized fencing production process

Hot dip galvanized fencing production process

September 25, 2018
Hot dip galvanized fencing production process---Hebei Jiebin Fence Factory mainly produces hot-dip galvanized fencing mesh (hot-dip galvanized fencing mesh). It is a method of immersing fencing mesh in molten metal to obtain metal plating, and is coated with a fence. A metallurgically bonded alloy layer is formed between the net and the plated metal through dissolution, chemical reaction and diffusion.
Hot-dip galvanized fence nets are silver-white in color and have a long life span. They can be used in suburban areas for more than 50 years. In urban areas or offshore areas, the service life can reach 20 years.
1. Analysis of Causes for Low Efficiency of Galvanized Production of Fence Mesh According to the heating characteristics of the fencing mesh, it is necessary to have the open melt furnace to work. That is, the minimum height of the molten metal in the furnace must ensure that the sensing groove of the inductor can be submerged. Therefore, each time a good zinc alloy is prepared, only about 1/3 of the molten zinc can be cast (ie, the remaining metal level is guaranteed to be higher than the start-up melting height), and then zinc flakes must be added to melt and re-prepare the next furnace batch melting. When carrying out alloy preparation, mixing and pre-furnace analysis, Jiebin Factory can only stop heating or keeping warm, the continuous melting advantage of the high-power induction furnace can not be achieved, and the mixer's lifting and lifting operations are troublesome.
2. For the galvanized alloy composition of the fence mesh, the alloy composition is not uniform. Because the diameter of the stirring blade is restricted by the aperture size on the top (influence of thermal efficiency), the influence of the small-scale stirring on the rectangular furnace is limited, so Jiebin Network Insufficient agitation and the iron-enhancing effect of the blade have a negative effect on the uniformity of the components and on the requirements of the iron content. How to change the variety of fence mesh alloys troubles, need to replace the alloy varieties, Jiebin to large-capacity cored furnace washing furnace is a time-consuming and costly work, when changing alloying elements, the washing furnace takes a long time to complete the work . Has influence on the electrical appliances and furnace age. When the alloy fluid is released, a large amount of zinc flakes are added, the temperature is the lowest, and high power is required to raise the temperature; when the intermediate alloy is formulated, the temperature needs to be raised to the highest level, which is not favorable in terms of energy consumption and metal burn. control.

Hot-dip galvanized fence net has long use time, sturdiness and durability, saving time and effort, comprehensive protection, mainly used in highways, communities, airports, factories and mines, etc. More hot-dip galvanized fence fence is made in Hebei Jiebin Fence Factory.

IMG_4114

문의하기

Author:

Ms. Jolin Jie

Phone/WhatsApp:

+8615030831097

인기 상품
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

문의하기

Author:

Ms. Jolin Jie

Phone/WhatsApp:

+8615030831097

인기 상품
공급 업체와 통신?공급 업체
Jolin Jie Ms. Jolin Jie
나는 당신을 위해 무엇을 할 수 있습니까?
공급 업체에 문의하십시오